Programming your Samsung A920 cell phone for Bell Mobility

Using this short guide, we will take you by the hand and walk you through the process of programming your phone number on your Samsung A920 Bell Mobility cell phone. Don’t worry; the process is not difficult In nine simple steps, you will have your phone programmed in no time. And you’ll save up to $25 on in-store programming fees.

Then let’s get started! First, however, turn on your phone. If you’re using your battery and don’t have your phone connected to its charger, make sure the battery has at least two bars of charge.

Step 1: Press this series of buttons on your phone: [#][#][6][7][5].

Step 2: Press the [OK] button.

Step 3 – Enter the six-digit lock code provided to you by Bell Mobility. The screen will display the SVC MENU. Please note: If you do not have your lock code, please contact Bell Mobility customer service by phone at 1-800-667-0123. Or you can watch our How to Activate Your Bell Cell Phone video on to find out how to get your lock code.

Step 4: Press [2] to edit.

Step 5: Enter your ten-digit cell phone number, including your area code, in the MOBILE IDENTIFICATION NUMBER (MIN) field. If there is already a number in that field, you can delete it by pressing the button [BACK] wrench.

Step 6: Press the [OK] button.

Step 7: Press [OK] again. The screen will display the electronic serial number (ESN).

Step 8: Press the [RIGHT LAUNCH PAD] wrench.

Step 9: Press [3] for DONE. Your phone will shut down and reboot itself.

And you are ready. You have just programmed your Samsung A920 cell phone for Bell Mobility.

Now that you have programmed your phone number, your phone should be ready to use, provided Bell has already activated it. If you haven’t activated your phone yet, you can do so at the store, or if you do it yourself, you can watch our How to Activate Your Bell Cell Phone video on for a full set of instructions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top